NEWS

You are here: Home > News

Gas chromatograph board maintenance and cleaning

Time:2018/10/09   Pageviews:0    Share:
 This is an article about Gas chromatograph board maintenance and cleaning. If you are interested, please contact us!


Turn off the power to the instrument before the gas chromatograph is ready for maintenance. screw headspace vials First, purge the board and board slots with gas chromatograph air or nitrogen. Use a soft brush to clean the dusty parts of the board and slots. Clean it up carefully. Wear gloves as much as possible during operation to prevent static or sweat from the hands from affecting certain components on the board.
After cleaning, the gas chromatograph board should be carefully observed to see if the printed circuit board or electronic components are severely corroded. screw headspace vials Wipe the electronic components and printed circuits contaminated with organic materials on the board with cotton lint, and then wipe the board interface and socket.
This is the end of the introduction of Gas chromatograph board maintenance and cleaning. I hope it can help you.

DO YOU HAVE A QUESTION REGARDING OUR PRODUCTS?

CONTACT US
Send Inquiry Live Chat Back To Top