NEWS

You are here: Home > News

Injector System in HPLC

Time:2020/07/21   Pageviews:0    Share:
This is an article about Injector System in HPLC. If you are interested, please contact us!

Like in other techniques, in HPLC the test sample is loaded into the stationary phase. But for this application HPLC has an injector system. The injector system loads the test sample into the stationary phase which is a column. Injector system contains an injector port, the place where the sample is injected. 

In modernized equipments the injector port is auto sealed section which gradually seals itself after the sample is injected. This injector port is made from a slightly thick flexible material. Auto sealed injector ports should be changed with time by the user, because with time its auto sealing ability reduces. The sample is usually injected using a micro liter syringe.

For HPLC vials, pls contact Quzhou Lab Technology Co.,Ltd for best price and stable quality.




This is the end of the introduction of Injector System in HPLC. I hope it can help you. 

DO YOU HAVE A QUESTION REGARDING OUR PRODUCTS?

CONTACT US
Send Inquiry Live Chat Back To Top
x