GL 45 Thread Safety Caps

Block solvent vapors with ventilation during removal with the Scat™ GL 45 Thread Safety Cap. It also features an air valve that combines valve and filter functions and solvents stay clean and components of solvent mixtures cannot evaporate.

GL 45 screw thread cap

Connector 3.2mm O. D.

Includes capillaries

SCAT Safety Cap I GL45 1 Port 3.2mm OD

SCAT Safety Caps for safe solvent supply, Safety Cap I GL45 1 Port 3.2mm OD tubing, with integrated manual Low Level control Indicator

Stopcocks allow a connector to be closed quickly and easily. This lets tubes and containers be changed securely and easily and keeps capillaries and inlet filters in the solvent. This is especially useful in not allowing air into HPLC Systems.

The integral air filter blocks hazardous vapours and cleans the inflowing air from dust and dirt particles. With various connectors for capillaries and tubes. Safety Caps are available for most common glass bottles (e.g. thread size GL45). They can be customized for other container sizes by using different adapters. Especially recommended for HPLC use: Solvents stay clean and components of solvent mixtures can not evaporate. Optimum protection against health hazards caused by evaporation and insufficient sealing.

Key advantages:

no evaporation of hazardous gases, thanks to the integrated air valve

no contamination of solvents

no crimping of connection tubing

easy container exchange

no air intake (HPLC)

cost efficiency (save expensive solvents by avoiding evaporation)

receptacles remain securely closed so the results of your analyes stay correct

safe solvent supply

no tube slippage

no interruption of analytical and work processes due to air pockets in the tube

no more twisting or tangles tubes, thanks to a freely-rotatable cap, even with tubes are installed.

With integral air filter vent. For maximum efficiency, we recommend that the vent is changed every 6 months. The filter membrane absorbs dust and dirt particles to protect your solvent reservoirs. The vent is universally suitable for all Safety Caps: it also works with your current Safety Caps. Simply replace the old vent with the new one.

SafetyCaps

No more harmful vapors

thanks to the integrated air valve.

No eluent contamination

Receptacles remain securely closed so the results

of your analyes stay correct.

No tube slippage

No accidential intake of air into the HPLC system.

No interruption of analytical and work processes

due to air pockets in the tube.

Easy container changes

thanks to a freely-rotatable cap, even with tubes

installed. Without twisting or "tangled tubes".

Confidence during audits

With S.C.A.T. systems, you pass quality and safety

inspections with confidence.

SafetyCaps with shut-off

No air entrapment in tube

After the supply container is changed, the current

analysis can be continued without interruption.

Ready for use again - quickly

During repairs on HPLC pumps, the shut-off on the

SafetyCaps can be closed so the capillaries and

solvent filter remain in the solvent. Thus the

pump can be quickly and easily flushed when

returning to operation after repairs.